White Beard
Joined: 20 Sep 2007
Posts: 1233
Location: Illinois
|
Zinc the ResMed VPAP Adapt SV Enhanced came out last year, I thought it replaced all the old VPAP ASV machines. Anyway the Ehnanced had a higher out put capacity 25 verses I think 20 on the other but I am not sure about that. Anyway the biggiest improvement was that with the enhanced you can see your AHI and AI on the panel screen, and you could not get that information from the older model! That right there is worth allot, as then you can monitor you progress with using it, without that data available you would never know if you therapy was working. With the enhanced you can reed off the top screen panel every morning your Leak rate, AHI, AI, Average Pressure, VT, Resp Rate, MV, Used, Usage, Mask fit, Out of habit every morning I check and write down this data. I also have the ResLink and data card with the Nonin Pulse-Ox that connects onto it, so every week or so, I down load it to my computer, and with the detailed data, I get my pulse and O2 Sat and all the rest of the data minute by minute all night long for all the nights! But the ResLink and Card and Card reader and the Pulse-Ox cost me a pretty penny! As I had to pay for that out of pocket! you can alway PM me if you have any questions! Good Luck to You .....white Beard
_________________ White Beard with a White Beard
Resmed VPAP Adapt SV Enhanced, HumidAire 2i, ResLink with Model 8000 Flex sensor Pulse Oximeter, and ResScan 3.5 software. Respironic EverFlo OPI Oxygen Concentrator 3 lpm
EEP 9.0, min PS 6.0, max PS 16.0, FitLife Mask
|